general:activityday
Table of Contents
Activity Day
This is the inspiration list for the bi-annual activity day at ATM. Not everything needs to be done every time, but use it as a reference.
The main task for everyone is to move everything on wheels from the workshop into the hallway. Important: The hallway is an escape route and must remain accessible, so keep items to the side.
General Tasks
- Sort the metal stock
- Sort the wood stock
- Clean and service wood clamps; sort by size.
- Organize the office
- Check, replace, and sharpen metal drills (0-13mm).
- Sort, check, and replace screw bits.
- Refill oil dispensers/bottles and ensure proper labeling.
- Remove cooling fluids from lathe, mill, and bandsaw.
- Empty vacuum cleaners.
- Service the small dust collectors (clean filters).
- Disassemble, clean, and remount the big dust collector filter.
- Search through the workshop for broken / dull tools and place in the board office for maintenance.
Large Projects
- Metal Chop Saws (2):
- Clean out chips.
- Empty and clean the cut fluid tub with a special cleaner.
- Circulate to clean pipes, then replace cut fluid and circulate.
- Clean the plasma cutter.
Cleaning Tasks
- Vacuum all floors.
- Clean the sink and surrounding area.
- Clean the floors, especially around the sink, lathe, milling machine, and bandsaw with Hercules cleaner (use gloves and eye protection).
- Clean the welding cabin.
- Vacuum all surfaces in the workshop, including ducts, walls, and ceilings dust masks available.
- Clean the metal workshop tables with turpentine.
Special tasks Autumn 2024
In an attempt to organize the club, we'll be trying to note down all the tools we have in the club. This way you know what we have available, even when designing at home.
We need a few members to walk around the club and add an entry to this spreadsheet with a name, location and image. If possible manufacturer and part number. Lastly we will label every tool if there is none.
general/activityday.txt · Last modified: 2024/10/22 15:00 by Hørður Andreasen